Oksitlenmiş refrakter Au-Ag cevherleri üzerinde Na2S+NaOH ön tanımlama liçinin etkisi

Year 2024, Volume: 13 Issue: 2, 440 - 447, 15.04.2024

Emine Yoğurtcuoğlu , İbrahim Alp

https://doi.org/10.28948/ngumuh.1380496

Abstract

Bu çalışma, oksitli refrakter altın-gümüş cevherlerinde alkali sülfür ön tanımlama işleminin siyanür liç performansına etkisini araştırmak amacıyla yapılmıştır. Yoğun oksit, karbonat ve silikat içeriğine sahip olan cevherde Fe, Pb ve Zn minerallerinin yanı sıra elektrum, akantit ve gümüş içeren FePbZn Sülfat-Arsenat/Hidroksit minerallerini içeren Au/Ag mineralleri de bulunmaktadır. Niğde Ulukışla refrakter Au/Ag cevheri 8-9g/t altın ve 170-180g/t gümüş tenörlerine sahiptir. Mineralojik incelemelerde, bu metallerin demir oksi/oksi hidroksit, kalsit, kuvars gibi minerallerin içerisinde kapanım halinde bulunduğu ya da bu minerallerle komşu olduğu tespit edilmiştir. Oda sıcaklığında gerçekleştirilen alkali sülfür ön işlemi sonrası siyanür çözündürme prosesinde metal kazanım verimleri altın için %62 ve gümüş için %7 olarak elde edilmiştir. Direkt siyanürleme işlemi ile kıyaslandığında gümüşün bu işlemden olumsuz etkilendiği görülmektedir. Bununla beraber, sıcak alkali işlem prosesinden sonra, metal ekstraksiyonlarında yaklaşık olarak %25 oranında altında ve %74 oranında gümüşte iyileşme meydana gelmiştir. Bu verim artışı sıcak alkali sülfür liçinin siyanür prosesine etkisi sonucu Ag-Oksihidroksitleri çözünebilir Ag formlarına dönüştürmesi şeklinde değerlendirilebilir. Bu bozundurma prosesinin en önemli avantajı ise daha düşük alkali konsantrasyonunda yüksek metal kazanım verimlerinin ulaşılabilmesidir.

Keywords

Na2S, NaOH, Altın, Gümüş, Refrakter cevher

Effect of Na2S+NaOH pre-identification leaching on oxidized refractory Au-Ag ores

Abstract

This study was conducted to investigate the effect of the alkaline sulfide (Na2S+NaOH) pre-identification process on cyanide leaching performance in oxidized refractory gold-silver ores. The ore has intensive oxide, carbonate, and silicate content, and contains Au/Ag minerals containing electrum, acanthite, and silver-bearing FePbZn Sulphate-Arsenate/Hydroxide minerals together with Fe, Pb, and Zn minerals. Niğde Ulukışla refractory Au/Ag ore has 8-9 g/T gold and 170-180 g/T silver grades. In mineralogical examinations, it was found that these metals were closed in minerals such as iron oxy/oxyhydroxide, calcite, and quartz or neighboring these minerals. In the cyanide soluble process after alkali sulfide preliminary procedure at room temperature, metal extraction yields were obtained as 62% for gold and 7% for silver. It is seen that silver is adversely affected by this process compared to the direct cyanidation process. However, after the hot alkali treatment process, metal extractions improved by approximately 25% of gold and 74% of silver. This increase in yield can be considered as converting Ag-oxyhydroxide into soluble Ag forms as a result of the effect of hot alkaline sulfur leaching on the cyanide process. The most important advantage of this decomposition process is to achieve high metal extraction efficiency in lower alkali concentrations.

Keywords

Na2S, NaOH, Gold, Silver, Refractory ore

References

• R.B. Bhappu, Hydrometallurgical Processing of Precious Metal Ores. Mineral Processing and Extractive Metallurgy Review, 6 (1–4), 67–80, 1990. Doi: 10.1080/08827509008952657.
• Y. Çilingir, Metallic Ores and Beneficiation Methods (Metalik Cevherler ve Zenginleştirme Yöntemleri) (in Turkish), (Volume 1). D.E.Ü. Faculty of Engineering Press, Izmir, Turkey, 1996.
• C. Abbruzzese, P. Fornari, R. Massidda, F. Vegliò, S. Ubaldini, Thiosulphate leaching for gold hydrometallurgy. Hydrometallurgy, 39(1–3), 265–276, 1995. Doi: 10.1016/0304-386X(95)00035-F.
• S. Ubaldini, P. Fornari, R. Massidda, C. Abbruzzese, An innovative thiourea gold leaching process. Hydrometallurgy, 48(1), 113–124, 1998. Doi: 10.1016/S0304-386X(97)00076-5.
• E. Yoğurtcuoğlu, Effect of Grinding and Alkali Pretreatment in Before Cyanidation of Oxidized Refractory Au/Ag Ores (in Turkish), PhD thesis, The Graduate School of Natural and Applied Sciences, Karadeniz Technical University, Trabzon, Turkey, 2017.
• D. Sinadinovic, Z. Kamberovic, B. Vakanjac, Refractory gold ores, characteristics and methods of their procession. VIII Balkan Mineral Processing Conference, Yugoslavia 411–418, 1999.
• J.A.Q. Riguelme, Improved Process Development for Complex Silver Ore Through Systematic, Advanced Mineral Characterisation. PhD thesis, The University of Queensland, Australia, 2014.
• S.R. La Brooy, H.G. Linge, G.S. Walker, Review of gold extraction from ores. Minerals Engineering, 7(10), 1213–1241, 1994. Doi: 10.1016/0892-6875(94)90114-7.
• N. Iglesias and F. Carranza, Refractory gold-bearing ores: a review of treatment methods and recent advances in biotechnological techniques. Hydrometallurgy, 34(3), 383–395, 1994. Doi: 10.1016/0304-386X(94)90074-4.
• D. Lunt and T. Weeks, Process flowsheet selection. Development in Mineral Processing, 15, 73–95, 2005.
• N.A. Ampofo, The Impact of Jarosites in BIOX® Product on CIL Processes - A Case Study of Anglogold Ashanti (Obuasi Mine), Master Thesis, Kwame Nkrumah University, 2015.
• M. Delfini, M. Ferrini, A. Manni, P. Massacci, L. Piga, Arsenic Leaching by Na2S to Decontaminate Tailings Coming From Colemanite Processing. Minerals Engineering, 16(1), 45–50, 2003.
• S.A. Awe, Selective Removal of Impurity Elements From Maurliden Vastra Complex Sulphides Flotation Concentrate, Master Thesis, Lulea University of Technology, Lulea, Sweden, 2008.
• S.A. Awe and Å. Sandström, Selective Leaching of Arsenic and Antimony From A Tetrahedrite Rich Complex Sulphide Concentrate Using Alkaline Sulphide Solution. Minerals Engineering, 23(15), 1227–1236, 2010.
• S.A. Awe, C. Samuelsson, Å. Sandström, Dissolution Kinetics of Tetrahedrite Mineral in Alkaline Sulphide Media. Hydrometallurgy, 103(1–4), 167–172, 2010.
• F. Veglio and S. Ubaldini, Optimisation of Pure Stibnite Leaching Conditions by Response Surface Methodology. The European Journal of Mineral Processing and Environmental Protection, 1(2), 103–112, 2001.
• M.I. Jeffrey and C.G. Anderson, A fundamental study of the alkaline sulfide leaching of gold. The European Journal of Mineral Processing and Environmental Protection, 3(3), 1303–868, 2003.
• C.G. Anderson and L.G. Twidwell, The alkaline sulfide hydrometallurgical separation, recovery and fixation of tin, arsenic, antimony, mercury and gold. Proceedings of the 2008 Global Symposium on Recycling, Waste Treatment and Clean Technology, REWAS 2008 (3), 159–68, 2008.
• A.N. Nikoloski, G.P.O. Malley, S.J. Bagas, The effect of silver on the acidic ferric sulfate leaching of primary copper sulfides under recycle solution conditions observed in heap leaching . Part 1 : Kinetics and reaction mechanisms. Hydrometallurgy, 173(March), 258–270, 2017. Doi: 10.1016/j.hydromet.2017.08.020.
• M.J. Nicol, C. A. Fleming, R.L. Paul, The Chemistry of the Extraction of Gold. In: Stanley, G.C., editor. The extractive metallurgy of gold, Nicol, M.J The Extractive Metallurgy of Gold in South Africa, SAIMM, Johannesburg, 831–905, 1992.
• J.O. Marsden and C. Lain. House, The chemistry of gold extraction. USA, 2006.
• W. Tongamp and T. Yasushi, A. Shibayama, Arsenic Removal From Copper Ores and Concentrates Through Alkaline Leaching in NaHS Media. Hydrometallurgy, 98(3–4), 213–218, 2009.
• A. Roca, F. Patiño, J. Viñals, C. Núñez, Alkaline decomposition-cyanidation kinetics of argentojarosite. Hydrometallurgy, 33(3), 341–357, 1993. Doi: 10.1016/0304-386X(93)90071-K.
• F. Patiño, E. Salinas, M. Cruells, A. Roca, Alkaline decomposition-cyanidation kinetics of argentian natrojarosite. Hydrometallurgy, 49(3), 323–336, 1998. Doi: 10.1016/s0304-386x(98)00041-3.
• M. Cruells, A. Roca, F. Patiño, E. Salinas, I. Rivera, Cyanidation kinetics of argentian jarosite in alkaline media. Hydrometallurgy, 55(2), 153–163, 2000. Doi: 10.1016/S0304-386X(99)00072-9.
• F. Patiño, M. Cruells, A. Roca, E. Salinas, M. Pérez, Kinetics of alkaline decomposition and cyanidation of argentian ammonium jarosite in lime medium. Hydrometallurgy, 70(1–3), 153–161, 2003. Doi: 10.1016/S0304-386X(03)00074-4.
• A. Roca, M. Cruells, F. Patiño, I. Rivera, M. Plata, Kinetic model for the cyanidation of silver ammonium jarosite in NaOH medium. Hydrometallurgy, 81(1), 15–23, 2006. Doi: 10.1016/j.hydromet.2005.09.004.
• F. Patiño, M.U. Flores, I.A. Reyes, H. Islas, M. Reyes, G. Juárez, Kinetic modeling of the alkaline decomposition and cyanidation of argentojarosite. Journal of the Mexican Chemical Society, 54(4), 216–222, 2010. Doi: 10.29356/jmcs.v58i1.149.
• E. Salinas, A. Roca, M. Cruells, F. Patino, D.A. Córdoba, Characterization and alkaline decomposition-cyanidation kinetics of industrial ammonium jarosite in NaOH media. Hydrometallurgy, 60(3), 237–246, 2001. Doi: 10.1016/S0304-386X(01)00149-9.
• G. Senanayake, Gold leaching in non-cyanide lixiviant systems: Critical issues on fundamentals and applications. Minerals Engineering, 17(6), 785–801, 2004. Doi: 10.1016/j.mineng.2004.01.008.
• O. Celep, I. Alp, H. Deveci, Improved gold and silver extraction from a refractory antimony ore by pretreatment with alkaline sulphide leach. Hydrometallurgy, 105(3–4), 234–239, 2011. Doi: 10.1016/j.hydromet.2010.10.005.
• E. Yoğurtcuoğlu and İ. Alp, The effect of grinding to cyanidation process after hot lime in refractory Au/Ag Ore (in Turkish). International Participated Cappadocia Geosciences Symposium, 74–78, 2018.
• E. Yoğurtcuoğlu, İ. Alp, O. Celep, V. Serbest, Applied of KOH leaching as pretreatment process for Bolkardağ Au/Ag ore. XV Anniversary Balkan Mineral Processing Congress, Sozopol, Bulgaria, 762–765, 2013.
• E. Yoğurtcuoğlu and İ. Alp, Performance of Cyanidation the Oxidized Au/Ag Ore. 14th International Mineral Processing Symposium, Aydın, Turkey, 723–728, 2014.
• E. Yoğurtcuoğlu and İ. Alp, The Impact of The Cyanidation Parameters on Au/Ag Recovery in Gossan Structured Ores (in Turkish). OHU J. Eng. Sci., 7(3), 1203–1208, 2018. Doi: 10.28948/ngumuh.502455.
• O. Celep, İ. Alp, V. Serbest, E. Yoğurtcuoğlu, A Preliminary Research on Gold and Silver Recovery from Bolkardağ (Niğde-Turkey) Ore. XIII International Mineral Processing Symposium (IMPS), Muğla, Turkey 605–612, 2012.
• E. Yoğurtcuoğlu, İ. Alp, O. Celep, V. Serbest, Evaluation of Alkaline Pre-Treatment to Improve Cyanidation Performance of Bolkardağ Au/Ag Ore (in Turkish). 23rd International Mining Congress & Exhibition of Turkey, Antalya, Turkey, 959–965, 2013.
• E. Yoğurtcuoğlu and İ. Alp, Characterization of Bolkardağ refractory Au/Ag ore (abstract). 12th International Congress for Applied Mineralogy, Istanbul, Turkey, 67, 2015.
• E. Yoğurtcuoğlu, Investigation of the effect of cyanidation after microwave roasting treatment on refractory gold / silver ores by characterization studies. Physicochem. Probl. Miner. Process. 59(1), 1–14, 2023. Doi: 10.37190/ppmp/157487.
• E. Yoğurtcuoğlu and İ. Alp, The Effect of Roasting on the Mineralogical Structure and Cyanidation Performance of Gossan Type Oxidized Refractory Gold-Silver Ores. Mining, Metallurgy and Exploration, 40(5), 1667–1679, 2023. Doi: 10.1007/s42461-023-00832-z.
• H. Islas, M.U. Flores, J.C. Juárez, M. Reyes, A. Blanco, E.J. Gutiérrez, et al., Silver leaching from jarosite-type compounds using cyanide and non-cyanide lixiviants: A kinetic approach. Minerals Engineering, 174(October), 1-12, 2021. Doi: 10.1016/j.mineng.2021.10 7250.
• S.L. Mesa Espitia and G.T. Lapidus, Pretreatment of a refractory arsenopyritic gold ore using hydroxyl ion. Hydrometallurgy, 153, 106–113, 2015. Doi: 10.1016/j.hydromet.2015.02.013.
• B. Şentürk, G. Özbayoğlu, Ü. Atalay, Flotation of Lead-Zinc Carbonate Ore of Kayseri̇-Zamanti District (in Turkish). Türkiye XIII . Madencilik Kongresi, 459–466, 1993.