avatar
Ali Kaya Gür Prof. Dr. FIRAT ÜNİVERSİTESİ
Publication 12 Review 33 CrossRef Cited 16
12 Publication
33 Review
16 CrossRef Cited

Research Fields

Resource Technologies Materials Engineering Plating Technology Composite and Hybrid Materials Material Characterization Metals and Alloy Materials Powder Metallurgy

Institution

FIRAT ÜNİVERSİTESİ

Publications

The Evaluation of The Effect of Heat Treatment on Microstructure, Microhardness and Abrasive Wear Resistance With Taguchi Method of Ramor 500 Steel
Authors: Ali Kaya Gür , Semih Taşkaya , Çetin Özay
Published: 2019 , Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
DOI: 10.17798/bitlisfen.532073
FAVORITE 0 TOTAL DOWNLOAD COUNT 1281

0

1281

Alloying and Investigation of Microalloyed Hardox 400 Steel Surface by Plasma Transfer Arc Welding Method
Authors: Ali Kaya Gür , Muhammet Hulusi Cengiz , Semih Taşkaya
Published: 2019 , Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
DOI: 10.24012/dumf.529451
FAVORITE 0 TOTAL DOWNLOAD COUNT 833

0

833

85/15 Bronz Kompozitinde Ni İlavesinin Üretim Parametrelerinde Elektriksel İletkenliğe Etkisi
Authors: Ali Kaya Gür , Tülay Yıldız , Nafiz Bozkurt
Published: 2019 , Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
DOI: 10.24012/dumf.537356
FAVORITE 0 TOTAL DOWNLOAD COUNT 1306

0

1306

Investigation of The Equilibrium of Permeate in The Welding Speed of The Wire Feeding Speed in Joining Ramor 500 Armor Steel With Submerged Arc Welding Method
Authors: Yüksek Müh. Semih Taşkaya , Ali Kaya Gür
Published: 2019 , Gümüşhane University Journal of Science and Technology
DOI: 10.17714/gumusfenbil.426195
FAVORITE 0 TOTAL DOWNLOAD COUNT 1986

0

1986

The Effect of Voltage on Joining of Ramor 500 Armor Steel With Submerged Arc Welding Method
Authors: Semih Taşkaya , Tülay Yıldız , Ali Kaya Gür
Published: 2018 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.355049
FAVORITE 0 TOTAL DOWNLOAD COUNT 3245

0

3245

PTA Kaplamalarda Abrasive Aşınma Davranışının Değerlendirilmesinde; Bir Taguchi Yaklaşımı
Authors: Ali Kaya Gür , Sinan Kaya
Published: 2017 , Fırat University Journal of Engineering Science
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1201

0

1201

PTA YÖNTEMİYLE FeCrC KAPLANMIŞ St-37 ÇELİĞİNİN AŞINMA ÖZELLİKLERİ
Authors: Ali Kaya Gür , Ayhan Orhan
Published: 2008 , Fırat Üniversitesi Doğu Araştırmaları Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 401

0

401

THE EFFECT AT WEAR BEHAVİOR OF COATİNG LAYER OF PROPORTİON GASES N2
Authors: Ali Kaya Gür , Tülay Yıldız
Published: 2008 , Technological Applied Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 537

0

537

Ni/Ti TOZLARININ PTA YÖNTEMİYLE AISI 1020 YÜZEYİNDEKİ KAPLAMALARININ MİKROYAPI ÖZELLİKLERİ
Authors: Ali Kaya Gür , Ayhan Orhan , Uğur Çalıgülü
Published: 2008 , Fırat Üniversitesi Doğu Araştırmaları Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 209

0

209

AISI 4142 ÇELİĞİNİN ELEKTRİK ARK KAYNAĞI İLE YÜZEY MODİFİKASYONU SONRASI SERTLİK VE MİKROYAPININ İNCELENMESİ
Authors: Tülay Yıldız , Ali Kaya Gür
Published: 2007 , Fırat Üniversitesi Doğu Araştırmaları Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 278

0

278

AŞINMA SİSTEMLERİ
Authors: Tülay Yıldız , Ali Kaya Gür
Published: 2006 , Fırat Üniversitesi Doğu Araştırmaları Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1296

0

1296

METALİK BİYOMALZEMELER VE BİYOUYUM
Authors: Ali Kaya Gür , Mustafa Taşkın
Published: 2004 , Fırat Üniversitesi Doğu Araştırmaları Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 5889

0

5889

Articles published in
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Fırat University Journal of Engineering Science
Fırat University Journal of Engineering Science
Fırat Üniversitesi Doğu Araştırmaları Dergisi
Fırat Üniversitesi Doğu Araştırmaları Dergisi
Gümüşhane University Journal of Science and Technology
Gümüşhane University Journal of Science and Technology
Sakarya University Journal of Science
Sakarya University Journal of Science
Technological Applied Sciences
Technological Applied Sciences
Editorship
International Journal of Eastern Anatolia Science Engineering and Design
International Journal of Eastern Anatolia Science Engineering and Design
Section Editor

Reviews

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Bilecik Seyh Edebali University Journal of Science
Bilecik Seyh Edebali University Journal of Science
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
European Journal of Technique (EJT)
European Journal of Technique (EJT)
Fırat University Journal of Engineering Science
Fırat University Journal of Engineering Science
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
International Journal of Eastern Anatolia Science Engineering and Design
International Journal of Eastern Anatolia Science Engineering and Design
International Journal of Pure and Applied Sciences
International Journal of Pure and Applied Sciences
Journal of Aviation
Journal of Aviation
Journal of Physical Chemistry and Functional Materials
Journal of Physical Chemistry and Functional Materials
Journal of Polytechnic
Journal of Polytechnic
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Mühendis ve Makina
Mühendis ve Makina
Sakarya University Journal of Science
Sakarya University Journal of Science
Technological Applied Sciences
Technological Applied Sciences

Publications

The Evaluation of The Effect of Heat Treatment on Microstructure, Microhardness and Abrasive Wear Resistance With Taguchi Method of Ramor 500 Steel
Authors: Ali Kaya Gür , Semih Taşkaya , Çetin Özay
Published: 2019 , Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
DOI: 10.17798/bitlisfen.532073
CITED 4 FAVORITE 0 TOTAL DOWNLOAD COUNT 1281

4

0

1281

Alloying and Investigation of Microalloyed Hardox 400 Steel Surface by Plasma Transfer Arc Welding Method
Authors: Ali Kaya Gür , Muhammet Hulusi Cengiz , Semih Taşkaya
Published: 2019 , Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
DOI: 10.24012/dumf.529451
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 833

3

0

833

85/15 Bronz Kompozitinde Ni İlavesinin Üretim Parametrelerinde Elektriksel İletkenliğe Etkisi
Authors: Ali Kaya Gür , Tülay Yıldız , Nafiz Bozkurt
Published: 2019 , Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
DOI: 10.24012/dumf.537356
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1306

3

0

1306

The Effect of Voltage on Joining of Ramor 500 Armor Steel With Submerged Arc Welding Method
Authors: Semih Taşkaya , Tülay Yıldız , Ali Kaya Gür
Published: 2018 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.355049
CITED 6 FAVORITE 0 TOTAL DOWNLOAD COUNT 3245

6

0

3245

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.