avatar
Harun Yaka Assoc. Prof. Dr. AMASYA UNIVERSITY
Publication 11 Review 22 CrossRef Cited 23 TR Dizin Cited 20
11 Publication
22 Review
23 CrossRef Cited
20 TR Dizin Cited
0000-0003-4859-9609

Research Fields

Engineering

Institution

AMASYA UNIVERSITY

Publications

Investigation of mechanical properties of AL5083 plates joined by MIG and TIG welding at different amperage values
Authors: Yalçın Yaşar , Harun Yaka , İbrahim Aslan , Halil Burak Kaybal
Published: 2024 , International Journal of Engineering Approaches
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 35

0

35

Improvement of Hole Qualities and Optimization of Machining Parameters Through Experimental and Finite Element Analysis in Drilling Of AISI D2 Cold Work Steel
Authors: Harun Yaka , Kaan Engin
Published: 2023 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.1310601
FAVORITE 0 TOTAL DOWNLOAD COUNT 187

0

187

Effect of drilling parameters on hole quality in drilling of pultruded GFRP composite material: Surface roughness, thrust force and delamination factor
Authors: Kaan Emre Engin , Harun Yaka
Published: 2023 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.1335448
FAVORITE 0 TOTAL DOWNLOAD COUNT 258

0

258

Enhancement of Shear Strength in Lap Joints with Different Surface Patterns
Authors: Harun Yaka , Levent Semiz , Harun Akkuş
Published: 2023 , Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 177

0

177

NİKEL ESASLI SÜPER ALAŞIMLARIN DELİNMESİNDE İŞLEME PARAMETRELERİNİN GRİ İLİŞKİSEL ANALİZ VE TAGUCHI İLE OPTİMİZASYONU
Authors: Harun Yaka , Ramazan Atılkan
Published: 2023 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
DOI: 10.17780/ksujes.1167745
FAVORITE 0 TOTAL DOWNLOAD COUNT 769

0

769

Multiple Optimization of Cutting Parameters Affecting Kerf Formation and Surface Roughness in Laser Cutting of Al 5052 Alloy
Authors: Harun Yaka
Published: 2022 , El-Cezeri
DOI: 10.31202/ecjse.958728
FAVORITE 0 TOTAL DOWNLOAD COUNT 447

0

447

Experimental and response surface methodology investigation of cast material obtained by melting and recycling of chips
Authors: Harun Akkuş , Harun Yaka
Published: 2021 , Celal Bayar University Journal of Science
DOI: 10.18466/cbayarfbe.898972
FAVORITE 0 TOTAL DOWNLOAD COUNT 309

0

309

Analysis of Surface Roughness of Aluminum 5000 Alloys Obtained from Chips After Turning by Taguchi Method
Authors: Harun Yaka
Published: 2021 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.771868
FAVORITE 0 TOTAL DOWNLOAD COUNT 704

0

704

Optimization of Turning Process By Using Taguchi Method
Authors: Harun Akkuş , Harun Yaka
Published: 2018 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.409502
FAVORITE 0 TOTAL DOWNLOAD COUNT 1747

0

1747

Tornalama işleminde yüzey pürüzlülüğü değerlerinin istatistiksel incelenmesi
Authors: Harun Akkuş , Harun Yaka , Levent Uğur
Published: 2017 , Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1305

0

1305

AISI 1040 Çeliğininin Tornalamasında Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin Taguchi Metodu İle Optimizasyonu
Authors: Harun Yaka , Harun Akkuş, Levent Uğur
Published: 2016 , Celal Bayar University Journal of Science
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 1988

0

1988

Articles published in
Celal Bayar University Journal of Science
Celal Bayar University Journal of Science
El-Cezeri
El-Cezeri
International Journal of Engineering Approaches
International Journal of Engineering Approaches
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi
Sakarya University Journal of Science
Sakarya University Journal of Science
Editorial Board Memberships
International Journal of Engineering Approaches
International Journal of Engineering Approaches

Reviews

Academic Platform - Journal of Engineering and Science
Academic Platform - Journal of Engineering and Science
Black Sea Journal of Engineering and Science
Black Sea Journal of Engineering and Science
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Duzce University Journal of Science and Technology
Duzce University Journal of Science and Technology
El-Cezeri
El-Cezeri
Erzincan University Journal of Science and Technology
Erzincan University Journal of Science and Technology
Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Fırat Üniversitesi Mühendislik Bilimleri Dergisi
International Journal of 3D Printing Technologies and Digital Industry
International Journal of 3D Printing Technologies and Digital Industry
International Journal of Advances in Engineering and Pure Sciences
International Journal of Advances in Engineering and Pure Sciences
International Journal of Technological Sciences
International Journal of Technological Sciences
Journal of Polytechnic
Journal of Polytechnic
Journal of the Institute of Science and Technology
Journal of the Institute of Science and Technology
Nigde Omer Halisdemir University Journal of Engineering Sciences
Nigde Omer Halisdemir University Journal of Engineering Sciences
Open Journal of Nano
Open Journal of Nano
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology
Osmaniye Korkut Ata University Journal of the Institute of Science and Technology

Publications

Improvement of Hole Qualities and Optimization of Machining Parameters Through Experimental and Finite Element Analysis in Drilling Of AISI D2 Cold Work Steel
Authors: Harun Yaka , Kaan Engin
Published: 2023 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.1310601
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 187

1

0

187

Effect of drilling parameters on hole quality in drilling of pultruded GFRP composite material: Surface roughness, thrust force and delamination factor
Authors: Kaan Emre Engin , Harun Yaka
Published: 2023 , Nigde Omer Halisdemir University Journal of Engineering Sciences
DOI: 10.28948/ngumuh.1335448
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 258

2

0

258

NİKEL ESASLI SÜPER ALAŞIMLARIN DELİNMESİNDE İŞLEME PARAMETRELERİNİN GRİ İLİŞKİSEL ANALİZ VE TAGUCHI İLE OPTİMİZASYONU
Authors: Harun Yaka , Ramazan Atılkan
Published: 2023 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences
DOI: 10.17780/ksujes.1167745
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 769

1

0

769

Multiple Optimization of Cutting Parameters Affecting Kerf Formation and Surface Roughness in Laser Cutting of Al 5052 Alloy
Authors: Harun Yaka
Published: 2022 , El-Cezeri
DOI: 10.31202/ecjse.958728
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 447

2

0

447

Analysis of Surface Roughness of Aluminum 5000 Alloys Obtained from Chips After Turning by Taguchi Method
Authors: Harun Yaka
Published: 2021 , Journal of the Institute of Science and Technology
DOI: 10.21597/jist.771868
CITED 4 FAVORITE 0 TOTAL DOWNLOAD COUNT 704

4

0

704

Optimization of Turning Process By Using Taguchi Method
Authors: Harun Akkuş , Harun Yaka
Published: 2018 , Sakarya University Journal of Science
DOI: 10.16984/saufenbilder.409502
CITED 9 FAVORITE 0 TOTAL DOWNLOAD COUNT 1747

9

0

1747

AISI 1040 Çeliğininin Tornalamasında Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin Taguchi Metodu İle Optimizasyonu
Authors: Harun Yaka , Harun Akkuş, Levent Uğur
Published: 2016 , Celal Bayar University Journal of Science
DOI: -
CITED 4 FAVORITE 0 TOTAL DOWNLOAD COUNT 1988

4

0

1988

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.