Mehmet Fahri Saraç Assoc. Prof. Dr. SÜLEYMAN DEMİREL ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, OTOMOTİV MÜHENDİSLİĞİ BÖLÜMÜ

Publication 12 Review 24 CrossRef Cited 10

12 Publication

24 Review

10 CrossRef Cited

Follow Following Edit My Profile

Followers

Following

Summary
Publications
Peer Review
Cited

Research Fields

Materials Science and Technologies Material Characterization Nanomaterials

Institution

SÜLEYMAN DEMİREL ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, OTOMOTİV MÜHENDİSLİĞİ BÖLÜMÜ

Publications

EVALUATION OF THE STRENGTH PROPERTIES OF A CLAY SOIL STABILIZED WITH FLY ASH AND BIOPOLYMER USING THE TAGUCHI TECHNIQUE

Authors: Mehmet Fatih Yazıcı , Mehmet Fahri Saraç , Çağla Aydın , Melce Begüm Polat , Can Mustafa Çalık , Caner Özen

Published: 2025 , Kahramanmaras Sutcu Imam University Journal of Engineering Sciences

DOI: -

FAVORITE 0 TOTAL DOWNLOAD COUNT 33

0

FAVORITE

33

TOTAL DOWNLOAD COUNT

Investigation of Microstructure and Wear Behaviors of AZ91 Alloy Under Different Heat Treatments

Authors: Gökçen Akgün , Dinçer Buran , Mehmet Fahri Saraç

Published: 2023 , Erzincan University Journal of Science and Technology

DOI: 10.18185/erzifbed.1254273

FAVORITE 0 TOTAL DOWNLOAD COUNT 287

0

FAVORITE

287

TOTAL DOWNLOAD COUNT

EFFECT OF ELECTRICAL RESISTANCE AND CORROSION PROPERTIES ON GRAFEN ADDED AA1050 METAL MATRIX COMPOSITES

Authors: Jülide Hazal Türkcan , Oguz Kaan Ozdemir , Mehmet Fahri Saraç

Published: 2022 , Journal of Engineering Sciences and Design

DOI: 10.21923/jesd.1105487

FAVORITE 0 TOTAL DOWNLOAD COUNT 558

0

FAVORITE

558

TOTAL DOWNLOAD COUNT

Shot Peening Effect on Reduced Graphene Oxide-based AA1070 Alloys Produced by Stir Casting Technique

Authors: İremnur Bülbül , Remzi Varol , Mehmet Fahri Saraç

Published: 2022 , Journal of Advanced Research in Natural and Applied Sciences

DOI: 10.28979/jarnas.1091422

FAVORITE 0 TOTAL DOWNLOAD COUNT 338

0

FAVORITE

338

TOTAL DOWNLOAD COUNT

IN-SITU SYNTHESIS OF 3D-PRINTED MAGNETIC NANOPARTICLES EMBEDDED PHOTOPOLYMERS

Authors: Mehmet Fahri Saraç

Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry

DOI: 10.46519/ij3dptdi.949271

FAVORITE 0 TOTAL DOWNLOAD COUNT 617

0

FAVORITE

617

TOTAL DOWNLOAD COUNT

The effect of functional nanoclay addition on the mechanical properties and impact behavior of hybrid composites

Authors: Ümran Esendemir , Recep Şimşek , Mehmet Fahri Saraç

Published: 2021 , Nigde Omer Halisdemir University Journal of Engineering Sciences

DOI: 10.28948/ngumuh.786231

FAVORITE 0 TOTAL DOWNLOAD COUNT 1560

0

FAVORITE

1560

TOTAL DOWNLOAD COUNT

Effect of Nanoclay Addition on Impact Behavior on Hybrid Composite Structures

Authors: Ümran Esendemir , Recep Şimşek, Mehmet Fahri Saraç

Published: 2020 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.661094

FAVORITE 0 TOTAL DOWNLOAD COUNT 683

0

FAVORITE

683

TOTAL DOWNLOAD COUNT

Titanyum Karbür (TiC) Takviyeli Epoksi ile Güçlendirilmiş Hibrit Kompozitlerin Çarpma Davranışının Deneysel ve Sayısal İncelenmesi

Authors: Mustafa Reşit Usal , Mustafa Taşlıdere , Mehmet Fahri Saraç

Published: 2020 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.606515

FAVORITE 0 TOTAL DOWNLOAD COUNT 1536

0

FAVORITE

1536

TOTAL DOWNLOAD COUNT

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography

Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol

Published: 2019 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.555398

FAVORITE 0 TOTAL DOWNLOAD COUNT 1049

0

FAVORITE

1049

TOTAL DOWNLOAD COUNT

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers

Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol

Published: 2019 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.555185

FAVORITE 0 TOTAL DOWNLOAD COUNT 1712

0

FAVORITE

1712

TOTAL DOWNLOAD COUNT

RHEOLOGICAL BEHAVIOR OF PARTICLE SIZE DEPENDENT FUMED SILICA BASED SHEAR THICKENING FLUIDS

Authors: Mehmet Fahri Saraç , Seçil Peker, Kerim Yapıcı

Published: 2018 , Journal of Engineering Sciences and Design

DOI: 10.21923/jesd.447357

FAVORITE 0 TOTAL DOWNLOAD COUNT 1606

0

FAVORITE

1606

TOTAL DOWNLOAD COUNT

Investigation of Thermal and Mechanical Properties of Aramid Fiber Reinforced Thermoplastic Polyurethane Elastomer Composites

Authors: Mehmet Fahri Saraç , Dinçer Buran , Murat Koru

Published: 2018 , Süleyman Demirel University Journal of Natural and Applied Sciences

DOI: -

FAVORITE 0 TOTAL DOWNLOAD COUNT 2467

0

FAVORITE

2467

TOTAL DOWNLOAD COUNT

Articles published in

Duzce University Journal of Science and Technology

Erzincan University Journal of Science and Technology

International Journal of 3D Printing Technologies and Digital Industry

Journal of Advanced Research in Natural and Applied Sciences

Journal of Engineering Sciences and Design

Journal of the Institute of Science and Technology

Kahramanmaras Sutcu Imam University Journal of Engineering Sciences

Nigde Omer Halisdemir University Journal of Engineering Sciences

Süleyman Demirel University Journal of Natural and Applied Sciences

Reviews

Duzce University Journal of Science and Technology

Gazi University Journal of Science

Harran University Journal of Engineering

International Journal of 3D Printing Technologies and Digital Industry

Journal of Advanced Research in Natural and Applied Sciences

Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University

Journal of Engineering Sciences and Design

Süleyman Demirel University Faculty of Arts and Science Journal of Science

Teknik Bilimler Dergisi

Uludağ University Journal of The Faculty of Engineering

Publications

IN-SITU SYNTHESIS OF 3D-PRINTED MAGNETIC NANOPARTICLES EMBEDDED PHOTOPOLYMERS

Authors: Mehmet Fahri Saraç

Published: 2021 , International Journal of 3D Printing Technologies and Digital Industry

DOI: 10.46519/ij3dptdi.949271

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 617

2

CITED

0

FAVORITE

617

TOTAL DOWNLOAD COUNT

The effect of functional nanoclay addition on the mechanical properties and impact behavior of hybrid composites

Authors: Ümran Esendemir , Recep Şimşek , Mehmet Fahri Saraç

Published: 2021 , Nigde Omer Halisdemir University Journal of Engineering Sciences

DOI: 10.28948/ngumuh.786231

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1560

2

CITED

0

FAVORITE

1560

TOTAL DOWNLOAD COUNT

Effect of Nanoclay Addition on Impact Behavior on Hybrid Composite Structures

Authors: Ümran Esendemir , Recep Şimşek, Mehmet Fahri Saraç

Published: 2020 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.661094

CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 683

1

CITED

0

FAVORITE

683

TOTAL DOWNLOAD COUNT

Titanyum Karbür (TiC) Takviyeli Epoksi ile Güçlendirilmiş Hibrit Kompozitlerin Çarpma Davranışının Deneysel ve Sayısal İncelenmesi

Authors: Mustafa Reşit Usal , Mustafa Taşlıdere , Mehmet Fahri Saraç

Published: 2020 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.606515

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1536

2

CITED

0

FAVORITE

1536

TOTAL DOWNLOAD COUNT

Mechanical Characterization of 3D Printable Nanoclay Reinforced Polymer Structures by Stereolithography

Authors: Mehmet Saraç , Merve Mert, İremnur Bülbül, İsmail Aktitiz, Berrin Saygı Yalçın, Remzı Varol

Published: 2019 , Journal of the Institute of Science and Technology

DOI: 10.21597/jist.555398

CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1049

2

CITED

0

FAVORITE

1049

TOTAL DOWNLOAD COUNT

Investigation of Mechanical Properties 3D Printable Fumed Silica Added Photo-Curable Polymers

Authors: Mehmet Saraç , Aslı Oranlı, İsmail Aktitiz, Berrin Saygı Yalçın, Remzi Varol

Published: 2019 , Duzce University Journal of Science and Technology

DOI: 10.29130/dubited.555185

CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1712

1

CITED

0

FAVORITE

1712

TOTAL DOWNLOAD COUNT

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.

Interactive Guide Tool

If you want to see the panel introduction, you can click Start Tour.

DergiPark is ranked number 1 by academic community in reaching knowledge in Türkiye.

Quick Links

Journals
Subjects
Training and How-to Videos
FAQ
Contact
KVKK
Our Mobile Applications

Our Mobile Applications

Türkçe // English //