avatar
Çetin Karataş Prof. Dr. It is not affiliated with an institution
Publication 14 Review 10 CrossRef Cited 17
14 Publication
10 Review
17 CrossRef Cited

Research Fields

Engineering Materials Science and Technologies Mechanical Engineering

Institution

It is not affiliated with an institution

Popular Publications

INVESTIGATION OF THE EFFECT OF ALLOY ELEMENTS IN STEEL SHEETS USED IN THE AUTOMOTIVE INDUSTRY
Authors: Abdullah Onur Özdemir , Hikmet Şirin, Çetin Karataş
Published: 2017 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/http-gujsc-gazi-edu-tr.322357
CITED 0 FAVORITE 1 TOTAL DOWNLOAD COUNT 4703

0

1

4703

The investigation of the effects of debinding time and dimensions of sample on parts produced from tungsten carbide by powder injection molding
Authors: Kamran Samet , Oğuz Yılmaz, Harun Koçak , Asghar Safarian , Çetin Karataş
Published: 2018 , Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi - B Teorik Bilimler
DOI: 10.20290/aubtdb.331088
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 1238

1

1

1238

Nikel Ara Katman Kullanılarak İnsörtlü Toz Enjeksiyon Kalıplama Yöntemiyle WC-Co/HSS Kompozit Parça Üretiminin Araştırılması
Authors: Harun Koçak , Kamran Samet, Oğuz Yılmaz, Çetin Karataş
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/http-gujsc-gazi-edu-tr.338871
CITED 4 FAVORITE 1 TOTAL DOWNLOAD COUNT 1970

4

1

1970

Toz enjeksiyon kalıplamada krom arayüzeyi kullanılarak montajlı parça imalatının araştırılması
Authors: Oguz Yilmaz, Kamran Samet , Harun Kocak , Cetin Karatas
Published: 2019 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.416519
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 1449

1

1

1449

Toz Enjeksiyon Kalıplamada 316 L Besleme Stokunun Çekme Yüzdesinin Yapay Sinir Ağları İle Tahmin Edilmesi
Authors: Mehmet Subaşı , Oguz Yılmaz, Kamran Samet , Asghar Safarian , Çetin Karataş
Published: 2020 , El-Cezeri
DOI: 10.31202/ecjse.727200
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 580

2

1

580

Publications

The Influence of Velocity and Pressure on Residual Stresses During The Backward and Forward Extrusion of AA6061 T6 Aluminium Alloy
Authors: Ban Bakır , Haithem Aljawad , Faruk Mert , Çetin Karataş
Published: 2024 , Manufacturing Technologies and Applications
DOI: 10.52795/mateca.1587573
FAVORITE 0 TOTAL DOWNLOAD COUNT 114

0

114

Numerical Analysis of Effective Die Heating Parameters in Induction Hot Forming
Authors: Emre Erol , Tayfun Menlik , Çetin Karataş , Adnan Sözen
Published: 2024 , Journal of Polytechnic
DOI: 10.2339/politeknik.1588854
FAVORITE 0 TOTAL DOWNLOAD COUNT 147

0

147

Investigation of Sinterability of WC-Co Component Comprising of AISI 4340 Steel Inserts
Authors: Mehmet Subaşı , Harun Koçak , Asghar Safarian , Çetin Karataş
Published: 2023 , Gazi University Journal of Science
DOI: 10.35378/gujs.1070501
FAVORITE 0 TOTAL DOWNLOAD COUNT 500

0

500

Tungsten Karbür Besleme Stoğundan Elde Edilen Parçalar İçin İdeal Çözücünün Araştırılması
Authors: Kamran Samet , Mehmet Subaşı , Çetin Karataş
Published: 2021 , Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
DOI: 10.17798/bitlisfen.935719
FAVORITE 0 TOTAL DOWNLOAD COUNT 434

0

434

Effect of Fiber Configuration on Mechanical Properties of Thermoplastic Composite Laminates
Authors: Abdullah Onur Özdemir , Çetin Karataş , Serdar Yücesu
Published: 2021 , Journal of Polytechnic
DOI: 10.2339/politeknik.711855
FAVORITE 0 TOTAL DOWNLOAD COUNT 1325

0

1325

Investigating the Effects of Forming Parameters on Molding Force and Springback in Deep Drawing Process of Thermoplastic Composite Laminates
Authors: Abdullah Onur Özdemir , Mehmet Subaşı , Çetin Karataş
Published: 2021 , Gazi University Journal of Science
DOI: 10.35378/gujs.765095
FAVORITE 0 TOTAL DOWNLOAD COUNT 896

0

896

Toz Enjeksiyon Kalıplamada 316 L Besleme Stokunun Çekme Yüzdesinin Yapay Sinir Ağları İle Tahmin Edilmesi
Authors: Mehmet Subaşı , Oguz Yılmaz, Kamran Samet , Asghar Safarian , Çetin Karataş
Published: 2020 , El-Cezeri
DOI: 10.31202/ecjse.727200
FAVORITE 1 TOTAL DOWNLOAD COUNT 580

1

580

İNSÖRTLÜ TOZ ENJEKSİYON KALIPLAMADA İNSÖRT MALZEMESİNİN ARAŞTIRILMASI
Authors: Mehmet Subaşı , Kamran Samet , Çetin Karataş
Published: 2020 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.728630
FAVORITE 1 TOTAL DOWNLOAD COUNT 731

1

731

Toz enjeksiyon kalıplamada krom arayüzeyi kullanılarak montajlı parça imalatının araştırılması
Authors: Oguz Yilmaz, Kamran Samet , Harun Kocak , Cetin Karatas
Published: 2019 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.416519
FAVORITE 1 TOTAL DOWNLOAD COUNT 1449

1

1449

Nikel Ara Katman Kullanılarak İnsörtlü Toz Enjeksiyon Kalıplama Yöntemiyle WC-Co/HSS Kompozit Parça Üretiminin Araştırılması
Authors: Harun Koçak , Kamran Samet, Oğuz Yılmaz, Çetin Karataş
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/http-gujsc-gazi-edu-tr.338871
FAVORITE 1 TOTAL DOWNLOAD COUNT 1970

1

1970

The investigation of the effects of debinding time and dimensions of sample on parts produced from tungsten carbide by powder injection molding
Authors: Kamran Samet , Oğuz Yılmaz, Harun Koçak , Asghar Safarian , Çetin Karataş
Published: 2018 , Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi - B Teorik Bilimler
DOI: 10.20290/aubtdb.331088
FAVORITE 1 TOTAL DOWNLOAD COUNT 1238

1

1238

INVESTIGATION OF THE EFFECT OF ALLOY ELEMENTS IN STEEL SHEETS USED IN THE AUTOMOTIVE INDUSTRY
Authors: Abdullah Onur Özdemir , Hikmet Şirin, Çetin Karataş
Published: 2017 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/http-gujsc-gazi-edu-tr.322357
FAVORITE 1 TOTAL DOWNLOAD COUNT 4703

1

4703

Ti-6Al-4V ALAŞIM TOZUNDAN HAZIRLANAN BESLEME STOKUNUN KALIPLAMA VE SİNTERLEME PARAMETRELERİNİN ARAŞTIRILMASI
Authors: Mehmet Subaşı , Çetin Karataş
Published: 2016 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gummfd.96710
FAVORITE 0 TOTAL DOWNLOAD COUNT 1919

0

1919

EFFECTS OF INJECTION MOLDING CONDITIONS ON RESIDUAL STRESS IN HDPE AND PP PARTS
Authors: Şükran Katmer, Çetin Karataş
Published: 2015 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gummfd.45855
FAVORITE 0 TOTAL DOWNLOAD COUNT 2844

0

2844

Articles published in
Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi - B Teorik Bilimler
Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi - B Teorik Bilimler
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
El-Cezeri
El-Cezeri
Gazi University Journal of Science
Gazi University Journal of Science
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Journal of Polytechnic
Journal of Polytechnic
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Editorial Board Memberships
Adana Alparslan Türkeş Science and Technology University Journal of Science
Adana Alparslan Türkeş Science and Technology University Journal of Science

Reviews

Bilecik Seyh Edebali University Journal of Science
Bilecik Seyh Edebali University Journal of Science
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
Journal of Polytechnic
Journal of Polytechnic
Uludağ University Journal of The Faculty of Engineering
Uludağ University Journal of The Faculty of Engineering

Publications

Effect of Fiber Configuration on Mechanical Properties of Thermoplastic Composite Laminates
Authors: Abdullah Onur Özdemir , Çetin Karataş , Serdar Yücesu
Published: 2021 , Journal of Polytechnic
DOI: 10.2339/politeknik.711855
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1325

2

0

1325

Investigating the Effects of Forming Parameters on Molding Force and Springback in Deep Drawing Process of Thermoplastic Composite Laminates
Authors: Abdullah Onur Özdemir , Mehmet Subaşı , Çetin Karataş
Published: 2021 , Gazi University Journal of Science
DOI: 10.35378/gujs.765095
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 896

2

0

896

Toz Enjeksiyon Kalıplamada 316 L Besleme Stokunun Çekme Yüzdesinin Yapay Sinir Ağları İle Tahmin Edilmesi
Authors: Mehmet Subaşı , Oguz Yılmaz, Kamran Samet , Asghar Safarian , Çetin Karataş
Published: 2020 , El-Cezeri
DOI: 10.31202/ecjse.727200
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 580

2

1

580

İNSÖRTLÜ TOZ ENJEKSİYON KALIPLAMADA İNSÖRT MALZEMESİNİN ARAŞTIRILMASI
Authors: Mehmet Subaşı , Kamran Samet , Çetin Karataş
Published: 2020 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.728630
CITED 2 FAVORITE 1 TOTAL DOWNLOAD COUNT 731

2

1

731

Toz enjeksiyon kalıplamada krom arayüzeyi kullanılarak montajlı parça imalatının araştırılması
Authors: Oguz Yilmaz, Kamran Samet , Harun Kocak , Cetin Karatas
Published: 2019 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gazimmfd.416519
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 1449

1

1

1449

Nikel Ara Katman Kullanılarak İnsörtlü Toz Enjeksiyon Kalıplama Yöntemiyle WC-Co/HSS Kompozit Parça Üretiminin Araştırılması
Authors: Harun Koçak , Kamran Samet, Oğuz Yılmaz, Çetin Karataş
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/http-gujsc-gazi-edu-tr.338871
CITED 4 FAVORITE 1 TOTAL DOWNLOAD COUNT 1970

4

1

1970

The investigation of the effects of debinding time and dimensions of sample on parts produced from tungsten carbide by powder injection molding
Authors: Kamran Samet , Oğuz Yılmaz, Harun Koçak , Asghar Safarian , Çetin Karataş
Published: 2018 , Anadolu Üniversitesi Bilim Ve Teknoloji Dergisi - B Teorik Bilimler
DOI: 10.20290/aubtdb.331088
CITED 1 FAVORITE 1 TOTAL DOWNLOAD COUNT 1238

1

1

1238

Ti-6Al-4V ALAŞIM TOZUNDAN HAZIRLANAN BESLEME STOKUNUN KALIPLAMA VE SİNTERLEME PARAMETRELERİNİN ARAŞTIRILMASI
Authors: Mehmet Subaşı , Çetin Karataş
Published: 2016 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gummfd.96710
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1919

1

0

1919

EFFECTS OF INJECTION MOLDING CONDITIONS ON RESIDUAL STRESS IN HDPE AND PP PARTS
Authors: Şükran Katmer, Çetin Karataş
Published: 2015 , Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi
DOI: 10.17341/gummfd.45855
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 2844

2

0

2844

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.