avatar
Sinan Aksöz Prof. Dr. PAMUKKALE UNIVERSITY, FACULTY OF THEOLOGY
Publication 11 Review 29 CrossRef Cited 17
11 Publication
29 Review
17 CrossRef Cited

Research Fields

Materials Science and Technologies Casting Technologies Material Characterization

Institution

PAMUKKALE UNIVERSITY, FACULTY OF THEOLOGY

Publications

Sample Production And Characterization Of NiTi+Nd Powders By Boro-Sintering Method After Mechanical Milling
Authors: Ceylan Karabudak , Nimet Kardeş Sever , Sinan Aksöz
Published: 2024 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.1415190
FAVORITE 0 TOTAL DOWNLOAD COUNT 197

0

197

Investigation of the Effect of Vacuum Cementation on Sinterability and Mechanical Properties of Fe-Based Composite Materials Produced by Powder Metallurgy Method
Authors: Özer Pamuk , Ümit Demir, Sinan Aksöz
Published: 2023 , Journal of Polytechnic
DOI: 10.2339/politeknik.836940
FAVORITE 0 TOTAL DOWNLOAD COUNT 1689

0

1689

Effects of Different Dissolution and Aging Heat Treatments on Metallographic and Mechanical Properties of NiTi Based Sheets
Authors: Sinan Aksöz , Rıdvan Arslan , Nimet Kardeş Sever , Bülent Bostan
Published: 2023 , Journal of Polytechnic
DOI: 10.2339/politeknik.979707
FAVORITE 0 TOTAL DOWNLOAD COUNT 1119

0

1119

Enhanced Wear Resistance of Mould Steel D2 via Gas Nitriding+Nitrocarburizing and Carbonitriding Processes
Authors: Ayşe Erkan, Engin Tan , İsmail Ovalı , Çelebi Ersoy, Sinan Aksöz , Rüçhan Yıldız
Published: 2022 , Cukurova University Journal of Natural and Applied Sciences
DOI: -
FAVORITE 0 TOTAL DOWNLOAD COUNT 383

0

383

An Investigation on the Effects of Boronizing Process on Microstructure and Microhardness of NiTi Alloy Produced by P/M Technique
Authors: Sinan Aksöz , Bülent Bostan , Yavuz Kaplan
Published: 2021 , Journal of Polytechnic
DOI: 10.2339/politeknik.717251
FAVORITE 0 TOTAL DOWNLOAD COUNT 772

0

772

The Effect of Oxidation Process After Nitrocarburization on Tribological Properties of AISI 4140 Steel
Authors: Yavuz Kaplan , Abdulbaki Yıldırım, Sinan Aksöz
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.585031
FAVORITE 0 TOTAL DOWNLOAD COUNT 2016

0

2016

The Effects of Zn, Cu and Mg Elements on Ageing, Microstructure and Hardness in Al Alloys Produced by P/M Method
Authors: Sinan Aksöz , Hakan Ada , Emre İnce , Serkan Özsoy , Yavuz Kaplan
Published: 2020 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.660489
FAVORITE 0 TOTAL DOWNLOAD COUNT 873

0

873

Investigation of the effects of boro-sintering process on the microstructure and hardness properties of raw P/M parts
Authors: Sinan Aksöz , Yavuz Kaplan , Engin Tan
Published: 2019 , Journal of Boron
DOI: 10.30728/boron.487811
FAVORITE 0 TOTAL DOWNLOAD COUNT 1204

0

1204

NiTi ŞBA Tozlarında B2-R-B19' Fazlarına Sıcaklık ve Deformasyonun Etkilerinin İncelenmesi
Authors: Sinan Aksöz , Gülizar Altınışık, Ekrem Emre Elverişli , Bülent Bostan
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.387674
FAVORITE 0 TOTAL DOWNLOAD COUNT 1203

0

1203

Effects of the AA2014/B4 C MMCs production with casting and post casting sintering operations on wear behaviors
Authors: Sinan Aksöz , Bülent Bostan
Published: 2018 , Journal of Boron
DOI: 10.30728/boron.373140
FAVORITE 0 TOTAL DOWNLOAD COUNT 1263

0

1263

Investigation of Characterization and Sinterability of Mechanically Synthesized NiTi + Zn Powders
Authors: Sinan Aksöz , Bülent Bostan
Published: 2018 , Journal of Polytechnic
DOI: 10.2339/politeknik.389617
FAVORITE 0 TOTAL DOWNLOAD COUNT 1414

0

1414

Articles published in
Cukurova University Journal of Natural and Applied Sciences
Cukurova University Journal of Natural and Applied Sciences
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Journal of Boron
Journal of Boron
Journal of Polytechnic
Journal of Polytechnic
Editorship
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Section Editor

Reviews

Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi
Aksaray University Journal of Science and Engineering
Aksaray University Journal of Science and Engineering
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
El-Cezeri
El-Cezeri
Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Fırat Üniversitesi Mühendislik Bilimleri Dergisi
Gazi Journal of Engineering Sciences
Gazi Journal of Engineering Sciences
Gazi University Journal of Science Part C: Design and Technology
Gazi University Journal of Science Part C: Design and Technology
Journal of Boron
Journal of Boron
Journal of Polytechnic
Journal of Polytechnic
Makina Tasarım ve İmalat Dergisi
Makina Tasarım ve İmalat Dergisi
Manufacturing Technologies and Applications
Manufacturing Technologies and Applications
Turkish Journal of Engineering Research and Education
Turkish Journal of Engineering Research and Education
Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
Uluslararası Doğu Anadolu Fen Mühendislik ve Tasarım Dergisi
Usak University Journal of Engineering Sciences
Usak University Journal of Engineering Sciences

Publications

Investigation of the Effect of Vacuum Cementation on Sinterability and Mechanical Properties of Fe-Based Composite Materials Produced by Powder Metallurgy Method
Authors: Özer Pamuk , Ümit Demir, Sinan Aksöz
Published: 2023 , Journal of Polytechnic
DOI: 10.2339/politeknik.836940
CITED 1 FAVORITE 0 TOTAL DOWNLOAD COUNT 1689

1

0

1689

An Investigation on the Effects of Boronizing Process on Microstructure and Microhardness of NiTi Alloy Produced by P/M Technique
Authors: Sinan Aksöz , Bülent Bostan , Yavuz Kaplan
Published: 2021 , Journal of Polytechnic
DOI: 10.2339/politeknik.717251
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 772

2

0

772

The Effect of Oxidation Process After Nitrocarburization on Tribological Properties of AISI 4140 Steel
Authors: Yavuz Kaplan , Abdulbaki Yıldırım, Sinan Aksöz
Published: 2020 , Journal of Polytechnic
DOI: 10.2339/politeknik.585031
CITED 4 FAVORITE 0 TOTAL DOWNLOAD COUNT 2016

4

0

2016

Investigation of the effects of boro-sintering process on the microstructure and hardness properties of raw P/M parts
Authors: Sinan Aksöz , Yavuz Kaplan , Engin Tan
Published: 2019 , Journal of Boron
DOI: 10.30728/boron.487811
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1204

3

0

1204

NiTi ŞBA Tozlarında B2-R-B19' Fazlarına Sıcaklık ve Deformasyonun Etkilerinin İncelenmesi
Authors: Sinan Aksöz , Gülizar Altınışık, Ekrem Emre Elverişli , Bülent Bostan
Published: 2018 , Gazi University Journal of Science Part C: Design and Technology
DOI: 10.29109/gujsc.387674
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1203

2

0

1203

Effects of the AA2014/B4 C MMCs production with casting and post casting sintering operations on wear behaviors
Authors: Sinan Aksöz , Bülent Bostan
Published: 2018 , Journal of Boron
DOI: 10.30728/boron.373140
CITED 2 FAVORITE 0 TOTAL DOWNLOAD COUNT 1263

2

0

1263

Investigation of Characterization and Sinterability of Mechanically Synthesized NiTi + Zn Powders
Authors: Sinan Aksöz , Bülent Bostan
Published: 2018 , Journal of Polytechnic
DOI: 10.2339/politeknik.389617
CITED 3 FAVORITE 0 TOTAL DOWNLOAD COUNT 1414

3

0

1414

Popular Publications: It is determined automatically by the researchers doing research in DergiPark according to the statistics of being added to the favorites. CrossRef Cited: The citations shown in DergiPark are drawn from CrossRef. For this, the cited and cited articles must be registered in CrossRef (DOI number). ^: Citation numbers are reflected in the system by DergiPark at certain periods. : Click to get information about the DergiPark User Badge.
Interactive Guide Tool
If you want to see the panel introduction, you can click Start Tour.